• PRODUCTS
  • Baler Application
  • To Compress Waste Paper Series
  • Vertical Baler Machine
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Balers
  • To Compress Plastic Series
  • Vertical Baler Machine
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Balers
  • To Compress Textile Series
  • Vertical Baler Machine
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Baler Machine
  • Compress and Bagging Machine
  • To Compress Agriculture and Forestry Products
  • Horizontal Constant-weight Compress and Bagging Machine
  • Horizontal Dedicated Compress and Bagging Machine baler
  • Horizontal Dedicated block-making baler
  • Bundled Dedicated balers
  • To Compress Polyurethane Series
  • Vertical Baler Machine
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Baler Machine
  • To Compress Fibre Series
  • Vertical Baler Machine
  • Horizontal Dedicated Compress and Bagging Machine baler
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Baler Machine
  • To Compress Tire/Rubber
  • Vertical Baler Machine
  • Full-automatic Horizontal Balers
  • Cutter Machine
  • To Compress Living Rubbish
  • Vertical Baler Machine
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Balers
  • To Compress Medical Waste
  • Semi-automatic Horizontal Balers
  • Full-automatic Horizontal Balers
  • Glass Crushing Machine
  • To Compress Scrap Metal
  • Vertical Baler Machine
  • Metal Baler Machine
  • Rubber Cutter Machine
  • Baler Types
  • Vertical Baler machine
  • Semi-automatic Horizontal Baler Machine
  • Full-automatic Horizontal Baler Machine
  • Horizontal Dedicated Compress and Bagging Machine
  • Horizontal Dedicated Block-making Baler
  • Metal Baler Machine
  • Hydraulic Cutter Machine
  • Crushing Machine
  • EPS melting recycling machine
  • Accessories And Materials
  • Shredder (Crusher)
  • Shredding Fan
  • Conveyor
  • Dust collector
  • Separator
  • Pipe
  • Pneumatic/Electrical Balers
  • Reel Car
  • Hydraulic Handcart
  • Electronic Scale
  • Packing Material
  • Strapping Materails
  • Mobile Boarding Bridge
  • Different Material Application
  • Paper Series
  • Plastic Series
  • Metal Series
  • Textile Series
  • Agriculture and Forestry Products
  • Fibre Series
  • Tires Series
  • Polyurethane Series
  • Living Rubbish
  • Medical Waste
  • Glass Series
  • Solid Waste Discharge System
  • Whole Factory Trim Removal Solution for Corrugated Packaging Industry
  • Whole Factory Trim Removal Solution for Publication Printing Industry
  • Whole Factory Trim Removal Solution for Color Box Printing Industry
  • Whole Factory Trim Removal Solution for Soft Packaging Industry
  • Whole Factory Trim Removal Solution for Paper Mill Industry
  • Automatic Compressing and Packaging Solution for MSW
  • Automatic Compressing and Bagging Production Line
  • Cutting & Compressing Production Line for Plastic and Rubber
  • Cutting & Compressing Production Line for Paper
  • CONTACT US
  • Service and support 正文 Service and support
    Maintenance and Care
    According to the experience in maintaining and caring for over 10 years, we noticed people used to seek emergency repair only when it occurs fault or even break down, thus cause huge shutdown losses, or even seriously affect the production and delivery time. However, sometimes these are evitable. We hope users to read this manual carefully and operate the machine as specified. Conduct regular maintenance, decreasing stopping time due to machine failures and repair times, thus decrease the operation cost and lengthen the life time of the baler. Below are some tips for maintaining and caring the machine:

    For vertical balers

    Daily care
    1. Keep the machine surface clean and without any dust or soiling;
    2. Check to ensure the safety switch is in effect and the motor runs normally.
    Monthly care
    1. Check the machine to see if there is any leakage. Oil penetration on the piston rod indicates the O-rings needs to be changed. Oil film is considered as normal. Tighten any leaking parts with tools.
    2. Check every screw to see if there’s any loosening, tighten them if any.
    3. Lubricate the door hinges, connecting shaft and door guiding device.
    4. Check the connecting cable and electrical connection point to see if they are safe and reliable.
    Annual care
    1. Replace the oil filter in the hydraulic system.
    2. Change the hydraulic oil.

    For horizontal balers

    Daily care
    1. Check every part to see if they work well.
    2. Clean the waste on the machine surface, at both sides of and around the plate.
    3. Review the security methods to see if they work properly.
    Monthly care
    1. Inject grease into the mouths at every junction in the necking arm using grease gun.
    2. Clean the wire feeding machine and wire winding machine and apply grease.
    3. Pay special attention to the wire guiding wheels to see if they can rotate freely. Remove them to rust and lubricate if necessary. Replace with new bearing when it’s broken.
    4. Check the chain of the wire feeding machine and wire winding machine to see if there’s any loosening and tighten it if necessary.
    5. Remove the oil filter and check if there’s any oil stain blocking. Severe blocking will cause noises during pump running. Clean thoroughly with diesel. If it’s half blocked, that means the oil stains is overly built up, it should be cleaned as specified in the “Annual care”.
    6. Check the oil level gauge in the tank to see if it’s lower than the bottom limit. Refill oil when it’s inadequate. Refer to Oil Products in the brochure for oil specifications.
    Annual care
    1. Empty the oil tank. Open the cleaning window to clean the inside. Remove the oil filter and clean it with diesel. Then refill new oil.
    2. Check every part to make sure there’s no wearing, damage or drop off. Take care not to press the cutter, guide wheel, bearing, wire cutter and wire winding knife.

    上一篇:Installation and debugging  
    下一篇:Operating practice (for reference)
      ABOUT US     PRODUCTS     Solid Waste Discharge System     CONTACT US  

    ADD:9 Floor,#6 Building No.299 West Jiang Chang Road ,ShangHai ,China
    TEL:0086 21 68564313 FAX:0086 21 58338367
    Web:http://en.csj-baler.com E-mail:jiajing-tuiguang@shjiajing.com
    苏ICP备12059173号-1
    Copyright@NanTong JiaBao Mahinery Co.,Ltd 2001-2008 (Shanghai),T:0086 21 68563495